PS07 TWIN
Double load for screens, stencils, PumPrint stencils

kolb PS07 TWIN is a high-end single chamber PowerSpray® system for the thorough cleaning of two stencils (in one cleaning cycle), which provides excellent cleaning results in a short cycle time.

PS07 TWIN cleans stencils to 900 x 800 mm (35 "x 32"), making it especially suitable for large-scale manufacturing. The PS07 TWIN is extremely easy to use in daily operation with only one push of a button. All relevant maintenance units are quickly and easily accessible.

Highlights

• Two tank system with two separate circuits
• Comfortable push-one-button operation
• Fully automatic 4step process: cleaning, MediumWipe®, rinsing (tap water), drying with warm air
• Vertical fourfold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
• XPower magnetic coupled pumping system
• Short cycle time (approx. 7 min.) depending on used detergent and contamination
• Permanent filtration
• ClosedLoop reprocessing of cleaning and rinsing fluids as standard feature
• Water-free operation possible: Instead of water the system can use a suitable cleaning / rinsing detergent for rinsing
• Process and service intervals PLC controlled
• Event issuing and software control via high resolution 7" display with capacitative multi-touch
• PLC data recording and importing by scanner possible
• Certified for solar cell production
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - very small footprint

PS300 2HY
Cleans screens, stencils, mounted PCBs, misprints and tools

Optimal cleaning of assembled PCBs (ultra fine cleaning), screens and stencils (fine cleaning) and production tools as solder carriers and solder pallets (maintenance cleaning) today is a prerequisite for reproducible quality as well as for low failure rates, resulting in high customer satisfaction.

In small and medium-sized companies, however, the volumes of the individual cleaning tasks are not so high, that they justify a payback for individual cleaning systems.

The German engineered and manufactured kolb PS300 2HY takes this into consideration also for smallest applicable quantities. It is a full hybrid system with ClosedLoop water reprocessing that not only cleans screens, stencils and misprints, but can also take on ultra fine and even maintenance cleaning tasks.

Highlights

• Two tank system with triple circuit function
• Comfortable push-one-button operation
• Fully automatic 3step (optional up to 5step) process: cleaning, rinsing (tap water), drying with VMH® hot air
• Vertical twofold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
• PolyPower® pump-nozzles configuration (three times more pressure power, 30% less cycle time)
• Short cycle time (< 15 min.), depending on contamination and detergent
• Coarse filter, sediment filters for both tanks and fine filters for both circuits as standard
• ClosedLoop reprocessing of cleaning and rinsing fluids as standard feature
• Process and service intervals PLC controlled
• Event issuing and software control via high resolution 7" display with capacitative multi-touch
• PLC data recording and importing by scanner possible
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - very small footprint

PS300 HD
Cleans screens, stencils, PumpPrints, misprints, carriers

The entry model to safe and efficient fine cleaning: kolb PS300 HD is an extremely compact cleaning system, engineered and manufactured in Germany. Perfect for small and medium businesses with moderate daily cleaning requirements or for large companies with several printers where to each printer a single screen / stencil cleaner is installed

PS300 HD is a system for optimum cleaning of stencils, misprints and solder carriers, nowadays a prerequisite for reproducible quality and for low failure rates and thus high customer satisfaction.

Highlights

• Two tank system with communicating detergent
• Comfortable push-one-button operation
• Fully automatically looped 2step process: cleaning / rinsing and drying with HotSpeed warm air unit
• Water free process: no water connection, no waste water disposal necessary
• Vertical twofold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
• Cycle time: < 30 min, depending on contamination and detergent
• Permanent filtration
• ClosedLoop reprocessing of cleaning / rinsing fluid as standard feature
• Process and service intervals PLC controlled
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - very small footprint

PS300 VL
Cleans screens, stencils, PumpPrints, misprints, carriers

kolb PS300 VL is an extremely compact first-rate performance PowerSpray® system designed and manufactured in Germany for smaller quantities with very short cycle times due to an intelligent 4step process with patented high performance CWA® supercharger drying.

PS300 VL delivers best possible cleaning of screens, stencils, PumpPrints, misprints and solder frames, today a prerequisite for reproducible quality in production, the reduction of expensive production stand-stills and as well for high customer satisfaction.

Highlights

• Compact system with two tank function
• Comfortable push-one-button operation
• Fully automatically looped 4step process: cleaning, MediumWipe®, rinsing, CWA® drying
• Water free process: no water connection, no waste water disposal necessary
• Magnetic coupled XPower pumping unit
• Vertical twofold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
• Short cycle time: < 13 min, depending on detergent and contamination
• Permanent filtration
• ClosedLoop reprocessing of cleaning / rinsing fluid as standard feature
• Process and service intervals PLC controlled
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - very small footprint

PS300 VS
Cleans screens, stencils, PumpPrints, misprints, carriers

kolb PS300 VS is an extremely compact and powerful cleaning system engineered and manufactured in Germany. It is perfectly applicable for smaller quantities with short cycle times due to a dynamic 2step process with patented supercharger compression drying.

PS300 VS delivers best possible cleaning of stencils, misprints and solder frames, today a prerequisite for  reproducible quality in production, the reduction of expensive production stand-stills and as well for high customer satisfaction.

Highlights

• Two tank system with communicating detergent
• Comfortable push-one-button operation
• Fully automatically looped 2step process: cleaning / rinsing, CWA® supercharger compression drying
• Water free process: no water connection, no waste water disposal necessary
• Vertical rotor system with two asynchronous spray rotors for thorough wetting (no blind spots)
• Short cycle time: < 18 min, depending on detergent and contamination
• Permanent filtration
• ClosedLoop reprocessing of cleaning / rinsing fluid as standard feature
• Process and service intervals PLC controlled
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - very small footprint
• Certified for solar cell production

PSB100 H70
Fully automatic unique XL triple hybrid system

kolb PSB100 H70 is a fully automatic hybrid system with an XL process chamber - except kolb PSB X90 types there are no hybrid-batch systems with a comparably large chamber size available worldwide. The system is able to operate three different processes in three fully separate cycles: Ultrafine cleaning of PCBs and hybrids, fine cleaning of screens / stencils or misprints as well as maintenance cleaning of solder frames, carriers, magazines, ESD boxes etc.

PSB100 H70 is a German engineered and manufactured machine with a parallel working three-tank, three-circuit configuration with ClosedLoop water reprocessing ensuring short cycle times as well as low running cost leading to an uncontested low total cost of ownership value. A perfect system to cover all cleaning tasks of an electronic production.

Highlights

• Three tank system with fourfold circuit function
• Comfortable push-one-button operation
• Fully automatic 3step (optional up to 5Step) process: cleaning, rinsing (tap water), drying with VMH® hot air
• Automatic process detection when stencils are loaded
• Fourfold vertical and horizontal asynchronous surround spray rotor system
• PolyPower® pump-nozzles configuration (three times more pressure power, 30% less cycle time)
• Water-free operation possible with suitable cleaning / rinsing detergent
• Permanent filtration
• ClosedLoop reprocessing of cleaning and rinsing fluids as standard feature
• Exchange for rinse water tank (tank C) and pump out unit as standard features
• Process and service intervals PLC controlled
• Event issuing and software control via high resolution 10" display with capacitative multi-touch
• PLC data recording and importing by scanner possible
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - maximum capacity on a small footprint

PSB100 H90
Fully automatic hybrid system for all cleaning tasks in electronics production

kolb PSB100 H90 is a large scale system, able to operate three different processes in three fully separate cycles with PowerSpray® surround rotors system: Ultrafine cleaning of PCBs and hybrids, fine cleaning of screens / stencils or misprints and maintenance cleaning of up to 28 solder frames, carriers as well as magazines, filter steel sheets, etc.

The fully automatic cleaner with by far the largest process chamber of a hybrid batch system worldwide.

The parallel working three-tank, three-circuit configuration with ClosedLoop water reprocessing ensures short cycle times as well as low running cost leading to an uncontested low total cost of ownership value.

PSB100 H90 systems, equipped with loading and unloading automats can be coupled to highly efficient super mass plants.

Highlights

• Three tank system with fourfold circuit function
• Comfortable push-one-button operation
• Fully automatic 3step (otional up to 5Step) process: cleaning, rinsing (tap water), drying with VMH®-turbo hot air
• Automatic process detection when stencils are loaded
• Vertical and horizontal screen cleaning possible
• Electrically driven large double-wall airlock door: transparent or process-related with internal pane made of stainless steel
• Fourfold vertical and horizontal surround rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
• Water-free operation possible with suitable cleaning / rinsing detergent
• Permanent filtration
• ClosedLoop reprocessing of cleaning and rinsing fluids as standard feature
• Exchange for rinse water (tank C) and pump out unit as standard features
• Event issuing and software control via high resolution 10" display with capacitative multi-touch
• PLC data recording and importing by scanner possible
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - maximum capacity on a small footprint

PSB700 V50 TWIN
Cleans two screens, stencils or PumpPrints in one cycle

kolb PSB700 V50 TWIN is a fully automatic system for reliable precision cleaning of two screens, stencils, PumpPrints or other flat products. It removes quickly and thoroughly contaminations such as SMD-paste, SMD-adhesive, flux residues, stabilizer materials, flux, oil, grease or dust.

PSB700 V50 TWIN is a German engineered and manufactured machine with ClosedLoop water reprocessing and a two-tank and two separate circuits configuration which ensures short cycle times and makes this system the perfect economic choice for the cleaning of stencils.

The system is the perfect choice for larger daily amounts of cleaning goods. For smaller quantities or fewer daily cleaning cycles, the kolb stencil mono-cleaning systems of the PS300 series are often a more efficient solution.

Highlights

• Two tank system with two separate circuits
• Comfortable push-one-button operation
• Fully automatic 4step process: cleaning, MediumWipe®, rinsing, CWA® compression drying
• Vertical fourfold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
• Short cycle time - approx. 7 min. depending on detergent and contamination
• Water-free operation possible with suitable cleaning / rinsing detergent
• Permanent filtration
• Automatic monitoring of ionic residues contamination and gauging of rinse water quality
• ClosedLoop reprocessing of cleaning and rinsing fluids as standard feature
• Exchange for rinse water tank B / C and pump out unit as standard features
• Process and service intervals PLC controlled
• Event issuing and software control via high resolution 7" display with capacitative multi-touch
• PLC data recording and importing by scanner possible
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - maximum performance on a small footprint

PSB700 V70 TWIN
Cleans two sreens, stencils, PumpPrints in one cycle

kolb PSB700 V70 TWIN is a fully automatic system with a large process chamber for reliable precision cleaning of two screens, stencils, PumpPrints or other flat products. Removes quickly and thoroughly contaminations such as SMD-paste, SMD-adhesive, flux residues, stabilizer materials, flux, oil, grease or dust.

PSB700 V70 TWIN is a German engineered and manufactured machine with ClosedLoop water reprocessing and a two-tank and two separate circuits configuration which ensures short cycle times and makes this system the perfect economic choice for the cleaning of stencils.

The system is the perfectly suited for larger daily amounts of cleaning goods. For smaller quantities or fewer daily cleaning cycles, the kolb stencil mono-cleaning systems of the PS300 series are often a more efficient solution.

Highlights

• Two tank system with two separate circuits
• Comfortable push-one-button operation
• Fully automatic 4step process: cleaning, MediumWipe®, rinsing, CWA® compression drying
• Vertical fourfold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
• Short cycle time - approx. 5 minutes depending on detergent and contamination
• Water-free operation possible with suitable cleaning / rinsing detergent
• Permanent filtration
• Automatic monitoring of ionic residues contamination and gauging of rinse water quality
• ClosedLoop reprocessing of cleaning and rinsing fluids as standard feature
• Exchange for rinse water tank B / C and pump out unit as standard features
• Process and service intervals PLC controlled
• Event issuing and software control via high resolution 10" display with capacitative multi-touch
• PLC data recording and importing by scanner possible
• All safety relevant devices are standard features in the basic system configuration
• Extremely compact - maximum performance on a small footprint
• Certified for solar cell production